Back to previous page
Previous Page
AegisGuard Life (LL, LP and LS) Series Radiation Shields
Consolidated Test Results

AegisGuard™ L (LL, LP & LS) Series Radiation Shields
Consolidated RF/EMF Shielding Performance

Maximum Power Level
At Point Of Contact
5 Hz. to 100 Hz. 25.0 Watts Up to 99.998% (a, b)
Up to 2.6 GHz. 25.0 Watts Up to 99.997% (a, b)
Up to 30 GHz. 25.0 Watts Up to 99.997% (a, b, c)
Up to 120 GHz. 25.0 Watts Up to 99.996% (a, b, c, d)
Up to 360 GHz. 25.0 Watts Up to 99.994% (a, b, c, d)
Up to 1.1 THz. 25.0 Watts Up to 99.993% (a, b, c, d)
*Shielding effectiveness exceeds human RF exposure limit safety requirements as set forth in FCC OET Bulletin 65, up to 25 Watts at point of contact.

Testing Standards**
ASTM-D4935-10, D4935-99 and D4935-18 (current D4935 version): 5 Hz. to 1.5 GHz. EMF (electromagnetic field) planar tests. Extended estimates to 2.6 GHz.1.
(b) NSA 94-106: 1 kHz. to 10 GHz.: IEEE-299-2006 (R2012): 5 Hz. to 18 GHz. planar EMF (electromagnetic field) tests (extended estimates from 18 GHz. to 40 GHz.).2
(c) ETSI EN 302 567
V2.2.0 (2020-12) 100 kHz. to 1 MHz. over 142 GHz. network service RF (radiofrequency) band tests; exceeds current and proposed IEEE 802.nn RF.3, 4
(d) Network and device RF and EMF radiofrequency t
ests from 5 Hz. to 1.1 THz. conducted in-house (test equipment), at customer facilities and by independent testing laboratories.4

1: ASTM standards for secure, immovable small flat surface testing.
2: NSA and IEEE standards for secure, immovable flat surface and enclosure testing up to 10 square feet (0.92 square meter).
3: ETSI and IEEE actual network and device RF network shielding testing standards
4: In-house, customer facility, and independent laboratory current and forthcoming product and network technology tests when RF standards do not exist.


AegisGuard L (Life) SeriesTest Results