Local Dealers
Order Online
AegisGuard XP Radiation Shields
30 Day Money Back Guarantee
(excludes custom products)

Made in USA
XP Home Features Models Instructions
Important Note
AegisGuard™ XP was developed in 2002 for a limited range of military and industrial RF 5 Hz. to 45 GHz. @ 5 Watt RF and EMF shielding applications. It will not protect users from 4G-LTE, 5G and subsequent "G" generation technology frequencies above 45 GHz.@ 5 Watts generated by carrier backhaul, broadband, Massive MIMO (massive multiple-input, multiple-output), MIMO (multiple-input massive multiple-output), mmWave (millimeter wave), satellite, and WAN (wide area network) networks.

AegisGuard™ L (Life) Series (LL, LP and LS) shielding products support a broader range of consumer, military, commercial, industrial, and health care shielding applications, protecting users from electrical and wireless RF and EMF 5 Hz. to 1.1 THz. frequencies and the fields they carry. They provide unmatched RF and EMF shielding protection from the higher and lower frequencies generated by wireless networks and products, plus carrier generated 86, 96, 300, and 600 GHz. operating frequencies required for 4G-LTE and 5G communication networks, and future 6G 1 THz. technologies.


Standard Models Custom Lengths
(shown trimmed and untrimmed)
(shown untrimmed)
AegisGuard XP Radiation Shield - 3 x 6 in. (7.62 x 15.24 cm) Larger image Click for standard model installation instructions Product mounted on trimmed shield - Larger image Portable computer on custom length shield - Larger image AegisGuard installed in a flight helmet - Larger image
Product & Body Wear Portables Contact Us

Placed between the body and a wired or wireless product, AegisGuard™ XP Radiation Shields provide an unprecedented level of permanent protection from the radiation emitted by a broad range of wired and wireless products operating over a wide spectrum of frequencies and power levels. They do not contain Nickel or MDF.

Incorporating a hypoallergenic multi-layer reflective shielding composition developed for commercial and military applications that has no effect upon performance or power consumption, the shielding effectiveness for products operating between 5 Hz. @ 10 Watts to 15 GHz. @ 5 Watts is greater than 99.9%. Shielding applications for frequencies up to 45 GHz. @ 0.5 Watts with a shielding effectiveness greater than 98.8% are supported.

Only 1/8 in. (3.18 mm) thick and lightweight, AegisGuard™ XP Radiation Shields are easily cut to size and shape with scissors. Suitable for a wide range of applications including cellular phones which are never placed against the head (see AegisGuard™ LS if you hold a phone to your ear), cardiac pacemakers, transponders and virtually any wired or wireless product, standard pocket sized models up to 4 x 8 in (10.16 x 20.32 cm) are used in pockets, pouches, purses or with body style products and include VELCRO fasteners for easily attaching the shield to a product or garment. For portable computer, radar gun and similar applications where the shield is used as a placement or attached to the product with VELCRO, a 12 x 18 in. (30.48 x 45.72 cm) standard model is also available.

Larger sizes are cut to order as custom lengths for use with aircraft, pilot and ground communication systems, two-way radios, personnel protection, production environments, medical equipment, and much more. They are easily installed by simply placing a product on the shield or using VELCRO to prevent product movement. A non corrosive adhesive can be used for permanent applications.


[ Home ] [ Products ] [ Shop ] [ Privacy ] [ About ] [ Contact ] [ Site Map


Copyright 2023 Aegis Corporation- All Rights Reserved