AegisGuard LL Features and Specifications

Local Dealers

Order Online

AegisGuard^™LL Features & Specifications

LL Home

Features

Technology

Models

Instructions

Click product for larger image

Before

After

AegisGuard™ LL Radiation Shields are safe, convenient and easy to apply shielding products providing an unsurpassed level of personal RF/EMF shielding protection from the airborne radiation emitted by any wired and wireless product or network operating at the frequencies and power levels shown below.

AegisGuard™ LL is added to the final rinse water for your hand and machine washable clothing, and other fabrics. When following the instructions included with the product, each model provides outstanding radiation shielding protection within its supported frequency and output power ranges.

AegisGuard™ LL Radiation Shields do not require grounding, contain metal, conductive or absorption-based materials, animal by-products, fluorocarbons, graphene, Nickel or MDF, nor are they harmful to humans or animals in any manner whatsoever.

The microencapsulated shielding compounds are encapsulated in an unscented water soluble powder made from sodium bicarbonate, the same ingredient used for baking soda. Safe for all washable fabrics, they only adhere to natural and man made fibers and completely wash out with laundry detergent and water, such as during a wash cycle. When the sodium bicarbonate dissolves in the final rinse water, the shielding compounds expand and adhere to the fabrics being rinsed until they are washed with detergent and water. The color, texture and appearance of fabrics are not altered or damaged.

AegisGuard™ L (LL, LP & LS) Series Radiation Shields Consolidated RF/EMF Shielding Performance
Operating Frequency	Maximum Power Level At Point Of Contact	Shielding Effectiveness*	Testing Standards**
5 Hz. to 100 Hz.	25.0 Watts	Up to 99.998%	*(a, b)*
Up to 2.6 GHz.	25.0 Watts	Up to 99.997%	*(a, b)*
Up to 30 GHz.	25.0 Watts	Up to 99.997%	*(a, b, c)*
Up to 120 GHz.	25.0 Watts	Up to 99.996%	*(a, b, c, d)*
Up to 360 GHz.	25.0 Watts	Up to 99.994%	*(a, b, c, d)*
Up to 1.1 THz.	25.0 Watts	Up to 99.993%	*(a, b, c, d)*
Shielding effectiveness exceeds human RF exposure limit safety requirements as set forth in FCC OET Bulletin 65, up to 25 Watts at point of contact. Testing Standards* (a) ASTM-D4935-10, D4935-99 and D4935-18 (current D4935 version): 5 Hz. to 1.5 GHz. EMF planar tests, extended from 1.5 GHz. to 2.6 GHz.¹. (b)** NSA 94-106: 1 kHz. to 10 GHz.: IEEE-299-2006 (R2012): 5 Hz. to 18 GHz. EMF planar tests, extended from 18 GHz. to 40 GHz. (see below for ASTM 2.6 & 30 GHz).² (c) ETSI EN 302 567 V2.2.0 (2020-12) 100 kHz. to 1 MHz. over 142 GHz. network service RF band tests; exceeds current and proposed IEEE 802.nn RF.^{3, 4} (d) Network and device RF and EMF radiofrequency tests from 5 Hz. to 1.1 THz. conducted in-house, at customer facilities and by independent testing laboratories.⁴ Notes 1: ASTM standards for secure, immovable small flat surface testing. 2: NSA and IEEE standards for secure, immovable flat surface and enclosure testing up to 10 square feet (0.92 square meter). 3: ETSI and IEEE actual network and device RF network shielding testing standards 4: Regulatory and industry approved safety measurement standards and procedures above 40 GHz. do not exist. Click here for a list of our test equipment, noting test laboratories, carriers and telecommunication network and device product manufacturers use the same standards with comparable equipment.

See AegisGuard Tests for additional information

Technology

[ Home ] [ Products ] [ Shop] [ Privacy ] [ About ] [ Contact ] [ Site Map ]